PLEASE KEEP AN EYE ON OUR CLOSED DATES PAGE! OUR SHOP IS RELOCATING TO MISSOURI IN AUGUST! MAIL IN ECU ADDRESS WILL CHANGE!

Save 10% on your ECU Flash with the Purchase of any Hard Part! Discount applies at checkout.
CJR Performance  |  SKU: CJR-032

CRF110F Cam Chain Guide

$29.99

Description

This is a replacement cam chain guide that is highly recommended while using high RPM applications. The OEM rubber rollers see excessive wear very quickly and often fail leaving rubber chunks to float around the engine case. READ ENTIRE DESCRIPTION BELOW BEFORE ORDERING.

Installation -
- Remove left engine cover
- Use flywheel puller to remove flywheel
- Remove OEM roller guide and spacer
- Remove the OEM rubber roller found in the middle of the cylinder. Use 10mm to remove the bolt and roller. Replace with a shorter 10mm bolt (not included) using the same or a new copper washer.
- Install chain guide in place of the OEM roller guide
- Re-Install covers, ensure camshaft is on TDC, turn over engine by hand 3 times before firing. 

DUE TO A RACE ITEM, THIS PRODUCT DOES NOT OFFER A WARRANTY - FOR RACE COMPETITION USE ONLY

NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES
This product is legal for closed-course competition use only; for racing vehicles (a competition vehicle not used on public highways). Intended for off-road use or race purposes; does not meet regulations of pollution controlled roads or highways. This system is NOT compliant with the California Environmental Protection Agency (E.P.A.) or California Air Resources Board (C.A.R.) for use on public roads or lands.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov -- Learn More

CJR Performance

CRF110F Cam Chain Guide

$29.99

This is a replacement cam chain guide that is highly recommended while using high RPM applications. The OEM rubber rollers see excessive wear very quickly and often fail leaving rubber chunks to float around the engine case. READ ENTIRE DESCRIPTION BELOW BEFORE ORDERING.

Installation -
- Remove left engine cover
- Use flywheel puller to remove flywheel
- Remove OEM roller guide and spacer
- Remove the OEM rubber roller found in the middle of the cylinder. Use 10mm to remove the bolt and roller. Replace with a shorter 10mm bolt (not included) using the same or a new copper washer.
- Install chain guide in place of the OEM roller guide
- Re-Install covers, ensure camshaft is on TDC, turn over engine by hand 3 times before firing. 

DUE TO A RACE ITEM, THIS PRODUCT DOES NOT OFFER A WARRANTY - FOR RACE COMPETITION USE ONLY

NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES
This product is legal for closed-course competition use only; for racing vehicles (a competition vehicle not used on public highways). Intended for off-road use or race purposes; does not meet regulations of pollution controlled roads or highways. This system is NOT compliant with the California Environmental Protection Agency (E.P.A.) or California Air Resources Board (C.A.R.) for use on public roads or lands.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov -- Learn More

View product
Back to top